As nzs 2080 1995 pdf Parklands

as nzs 2080 1995 pdf

O’Brien Windscreens and Automotive Glass SAI Global 4.3 Sample Storage and Preservation (AS/NZS 5667.1:1998 Section 11) • Consult with the laboratory to determine the most suitable methods for the storage and preservation of water quality samples.

as/nzs 46762000 pdf ebook download Doc Database

VIP Polymers Ltd VIPSeal Shear Banded Flexible Couplings. This appraisal is for a VIPSeal range of metal-banded flexible couplings with metal shear rings manufactured to AS/NZS 4327:1995 Metal-banded flexible couplings for low pressure applications., AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995.

Welcome to Static Electricity Control and Lightning Protection. Meech Australia, Newson Gale Australia and Alltec Australia AS/NZS 2080:2006 Australian/New Zealand Standard Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 Safety glass for land vehicles. In general, the performance requirements in this Standard are based on UNECE Reg. 43, Uniform provisions concerning the approval of safety glazing materials, with some significant differences. This Standard adopts the minimum …

Welcome to Static Electricity Control and Lightning Protection. Meech Australia, Newson Gale Australia and Alltec Australia The Australian & New Zealand Standard Safety Glass for Land Vehicles AS/NZS 2080:1995/2006 defines laminated safety glass as “a glass consisting of 2 or more sheets of glass held together by one or more layers of plastic material known as interlayers”.

AS/NZS 2080:2006 Australian/New Zealand Standard Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 Safety glass for land vehicles. In general, the performance requirements in this Standard are based on UNECE Reg. 43, Uniform provisions concerning the approval of safety glazing materials, with some significant differences. This Standard adopts the minimum … AS/NZS 2080:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME-055, Safety Glass for Land Transport. It was approved on behalf of the Council of Standards Australia on 14 August 2006 and on behalf of the Council of Standards New Zealand on 25 August 2006. This Standard was published on 26 September 2006.

AS/NZS 4331.1:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME/1, Pressure Equipment. It was approved on behalf of the Council of Standards Australia on 19 July 1995 and on behalf of the council of Standards New Zealand on 24 October 1995. It was published on 5 December 1995. The following interests are represented on Committee ME/1: A.C.T calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet

AS/NZS 2080:2006 Safety glazing for land vehicles Product Description Flat or curved heat treated safety glass, with or without obscuration bands for use as … PRODUCT COMPLIANCE SCHEDULE Fuyao Glass Industry Group Co. Ltd. Address: Fuyao Industrial Zone, Fuqing Fujian 350301, P. R. China. This schedule identifies the Certified Product(s) on which the PAS-Mark and ID.

AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen.

• Accrual Budgeting –Forecasting, for the government entity, revenues when they will be earned and received, expenses when they will be incurred and settled, and the Mines Safety Bulletin No. 97 Date: 6 February 2012 Introduction . This safety bulletin replaces Mines Safety Bulletin No. 83, dated 23 March 2009. The bulletin has been amended to be consistent with the earthing requirements (clause 4.2.2) of Australian Standard AS/NZS 1020:1995 The control of undesirable static electricity, which specifies a total resistance to earth

calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet Search details for as/nzs 4676:2000 Added : 2 year ago owner's manual dri-eaz drizair® dehumidfiers 115-volt models: 1200, 2000, 2400 warning read and save these instructions fire and electric shock …

This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen. The National Road Transport Commission (NRTC) released draft "Roadworthiness Guidelines" in September 1995 as part of their task to develop uniform laws and administrative guidelines for the "safe and efficient operation of road transport in Australia" (p1 of the draft document).

The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was … 4.3 Sample Storage and Preservation (AS/NZS 5667.1:1998 Section 11) • Consult with the laboratory to determine the most suitable methods for the storage and preservation of water quality samples.

now available as a Concrete Form Beam LP Building Products. AS/NZS 2080:2006 Safety glazing for land vehicles Product Description Flat or curved heat treated safety glass, with or without obscuration bands for use as …, Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com..

Glassform

as nzs 2080 1995 pdf

as/nzs 46762000 pdf ebook download Doc Database. AS 2080 Safety glass for land vehicles AS 2012.1 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition - Determination of compliance with limits for exterior noise, Copper Tube TO AS/NZS 1571 RefRigeRATiON & medicAl gAS cOppeR Tube BENEFITS • backed by mm Kembla’s reputation for quality, service and customer care for.

Mines Safety Bulletin No. 97 Department of Mines

as nzs 2080 1995 pdf

Triplex TD Windshield Logo Totally T-Type 2. PDF A. Results: match 0 of 0 provisions. Previous Hit Next Hit . Return to search results. 0 hits in page: First Last . Heavy Vehicle (Vehicle Standards) National Regulation . Heavy Vehicle (Vehicle Standards) National Regulation. Editor’s note— The Heavy Vehicle (Vehicle Standards) National Regulation is a law of Queensland under the Heavy Vehicle National Law (Queensland). It is intended Search details for as/nzs 4676:2000 Added : 2 year ago owner's manual dri-eaz drizair® dehumidfiers 115-volt models: 1200, 2000, 2400 warning read and save these instructions fire and electric shock ….

as nzs 2080 1995 pdf


calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet AS/NZS 2080:2006 - Safety glass for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on

This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen. This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen.

AS/NZS 2080:2006 - Safety glass for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on Copper Tube TO AS/NZS 1571 RefRigeRATiON & medicAl gAS cOppeR Tube BENEFITS • backed by mm Kembla’s reputation for quality, service and customer care for

Copper Tube TO AS/NZS 1571 RefRigeRATiON & medicAl gAS cOppeR Tube BENEFITS • backed by mm Kembla’s reputation for quality, service and customer care for Buy Samsung DM65E LH65DMEPLGC/EN Public Displays from Technoworld.com This website uses cookies. By continuing to browse the site you are agreeing to the use of cookies.

Mines Safety Bulletin No. 97 Date: 6 February 2012 Introduction . This safety bulletin replaces Mines Safety Bulletin No. 83, dated 23 March 2009. The bulletin has been amended to be consistent with the earthing requirements (clause 4.2.2) of Australian Standard AS/NZS 1020:1995 The control of undesirable static electricity, which specifies a total resistance to earth Welcome to Static Electricity Control and Lightning Protection. Meech Australia, Newson Gale Australia and Alltec Australia

The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was … AS/NZS 2080:2006 Australian/New Zealand Standard Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 Safety glass for land vehicles. In general, the performance requirements in this Standard are based on UNECE Reg. 43, Uniform provisions concerning the approval of safety glazing materials, with some significant differences. This Standard adopts the minimum …

AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995

AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on The National Road Transport Commission (NRTC) released draft "Roadworthiness Guidelines" in September 1995 as part of their task to develop uniform laws and administrative guidelines for the "safe and efficient operation of road transport in Australia" (p1 of the draft document).

AS/NZS 2080:1995/Amdt 1:1996 English PDF Safety glass for land vehicles Amendment published 01/01/1996 by Australian/New Zealand Standards Design Standards for Urban Infrastructure 11.1 Introduction This standard covers the requirements for all classes of safety barriers and fences in the

AS 2080 Safety glass for land vehicles AS 2012.1 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition - Determination of compliance with limits for exterior noise Welcome to Static Electricity Control and Lightning Protection. Meech Australia, Newson Gale Australia and Alltec Australia

as nzs 2080 1995 pdf

AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on AS/NZS 2080:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME-055, Safety Glass for Land Transport. It was approved on behalf of the Council of Standards Australia on 14 August 2006 and on behalf of the Council of Standards New Zealand on 25 August 2006. This Standard was published on 26 September 2006.

Triplex TD Windshield Logo Totally T-Type 2

as nzs 2080 1995 pdf

Mines Safety Bulletin No. 97 Department of Mines. AS/NZS 2080:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME-055, Safety Glass for Land Transport. It was approved on behalf of the Council of Standards Australia on 14 August 2006 and on behalf of the Council of Standards New Zealand on 25 August 2006. This Standard was published on 26 September 2006., AS 2080 Safety glass for land vehicles AS 2012.1 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition - Determination of compliance with limits for exterior noise.

Glassform

O’Brien Windscreens and Automotive Glass SAI Global. Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com., AS/NZS 2080:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME-055, Safety Glass for Land Transport. It was approved on behalf of the Council of Standards Australia on 14 August 2006 and on behalf of the Council of Standards New Zealand on 25 August 2006. This Standard was published on 26 September 2006..

Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com. AS/NZS 2080:2006 Australian/New Zealand Standard Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 Safety glass for land vehicles. In general, the performance requirements in this Standard are based on UNECE Reg. 43, Uniform provisions concerning the approval of safety glazing materials, with some significant differences. This Standard adopts the minimum …

Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com. AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on

Copper Tube TO AS/NZS 1571 RefRigeRATiON & medicAl gAS cOppeR Tube BENEFITS • backed by mm Kembla’s reputation for quality, service and customer care for • Accrual Budgeting –Forecasting, for the government entity, revenues when they will be earned and received, expenses when they will be incurred and settled, and the

AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 PDF A. Results: match 0 of 0 provisions. Previous Hit Next Hit . Return to search results. 0 hits in page: First Last . Heavy Vehicle (Vehicle Standards) National Regulation . Heavy Vehicle (Vehicle Standards) National Regulation. Editor’s note— The Heavy Vehicle (Vehicle Standards) National Regulation is a law of Queensland under the Heavy Vehicle National Law (Queensland). It is intended

All tables have been designed in accordance with loads and design criteria set out in AS3610-1995, Formwork for Concrete, and AS1170.0 & AS1170.1 Loading Codes, and AS1720.1-1997 Timber Design Characteristic Values for LP LVL products have been developed by LP, and checked and certified in accordance with AS/NZS 4357.3-2006 determination of structural properties for LVL, and AS/NZS … AS/NZS 60335.1:2011 Household and similar electrical appliances - Safety - General requirements (IEC 60335-1 Ed 5, MOD) Current List of Standards up to date as of 12 August 2016 Page 2 of 3 AS/NZS 60335.1:2011 Household and similar electrical appliances - Safety - General requirements (IEC 60335-1 Ed 5, MOD) Current

The Australian & New Zealand Standard Safety Glass for Land Vehicles AS/NZS 2080:1995/2006 defines laminated safety glass as “a glass consisting of 2 or more sheets of glass held together by one or more layers of plastic material known as interlayers”. Search details for as/nzs 4676:2000 Added : 2 year ago owner's manual dri-eaz drizair® dehumidfiers 115-volt models: 1200, 2000, 2400 warning read and save these instructions fire and electric shock …

AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on

AS/NZS 2080:2006 - Safety glass for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was …

The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was … • Accrual Budgeting –Forecasting, for the government entity, revenues when they will be earned and received, expenses when they will be incurred and settled, and the

calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet AS/NZS 60335.1:2011 Household and similar electrical appliances - Safety - General requirements (IEC 60335-1 Ed 5, MOD) Current List of Standards up to date as of 12 August 2016 Page 2 of 3 AS/NZS 60335.1:2011 Household and similar electrical appliances - Safety - General requirements (IEC 60335-1 Ed 5, MOD) Current

Triplex TD Windshield Logo Totally T-Type 2

as nzs 2080 1995 pdf

as/nzs 46762000 pdf ebook download Doc Database. Design Standards for Urban Infrastructure 11.1 Introduction This standard covers the requirements for all classes of safety barriers and fences in the, Welcome to Static Electricity Control and Lightning Protection. Meech Australia, Newson Gale Australia and Alltec Australia.

as nzs 2080 1995 pdf

Fuyao Glass Industry Group Co. Ltd. NAGS. AS/NZS 2080:1995/Amdt 1:1996 English PDF Safety glass for land vehicles Amendment published 01/01/1996 by Australian/New Zealand Standards, This appraisal is for a VIPSeal range of metal-banded flexible couplings with metal shear rings manufactured to AS/NZS 4327:1995 Metal-banded flexible couplings for low pressure applications..

Mines Safety Bulletin No. 97 Department of Mines

as nzs 2080 1995 pdf

Mines Safety Bulletin No. 97 Department of Mines. This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen. The Australian & New Zealand Standard Safety Glass for Land Vehicles AS/NZS 2080:1995/2006 defines laminated safety glass as “a glass consisting of 2 or more sheets of glass held together by one or more layers of plastic material known as interlayers”..

as nzs 2080 1995 pdf

  • Mines Safety Bulletin No. 97 Department of Mines
  • & exoTeC RAINSCReeN jameshardie.co.nz
  • SAI Global Certification Services Pty Ltd Trading as SAI
  • O’Brien Windscreens and Automotive Glass SAI Global

  • calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet AS 2080 Safety glass for land vehicles AS 2012.1 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition - Determination of compliance with limits for exterior noise

    AS/NZS 2080:2006 Australian/New Zealand Standard Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 Safety glass for land vehicles. In general, the performance requirements in this Standard are based on UNECE Reg. 43, Uniform provisions concerning the approval of safety glazing materials, with some significant differences. This Standard adopts the minimum … AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995

    AS 3610.1—2010 2 PREFACE This Standard was prepared by the Standards Australia Committee BD-043, Formwork, to supersede, in part, AS 3610—1995, Formwork for concrete. AS/NZS 2080:2006 Safety glazing for land vehicles Product Description Flat or curved heat treated safety glass, with or without obscuration bands for use as …

    The Australian & New Zealand Standard Safety Glass for Land Vehicles AS/NZS 2080:1995/2006 defines laminated safety glass as “a glass consisting of 2 or more sheets of glass held together by one or more layers of plastic material known as interlayers”. AS/NZS 2080:2006 - Safety glazing for land vehicles “the StandardsMark Licensee” the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on

    AS/NZS 2080:2006 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME-055, Safety Glass for Land Transport to supersede AS/NZS 2080:1995 AS 3610.1—2010 2 PREFACE This Standard was prepared by the Standards Australia Committee BD-043, Formwork, to supersede, in part, AS 3610—1995, Formwork for concrete.

    The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was … The first Australian and New Zealand Risk Management Standard AS/NZS 4360 was released in 1995 and updated in 1999 and 2004 respectively. This standard was …

    Design Standards for Urban Infrastructure 11.1 Introduction This standard covers the requirements for all classes of safety barriers and fences in the The Australian & New Zealand Standard Safety Glass for Land Vehicles AS/NZS 2080:1995/2006 defines laminated safety glass as “a glass consisting of 2 or more sheets of glass held together by one or more layers of plastic material known as interlayers”.

    calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet This Standard specifies requirements for respiratory protective devices (respirators) intended to provide, according to type, varying degrees of protection against atmospheres containing substances which may be harmful if breathed; also, with certain types, to provide protection against atmospheres which may be deficient in oxygen.

    calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet AS/NZS 4331.1:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME/1, Pressure Equipment. It was approved on behalf of the Council of Standards Australia on 19 July 1995 and on behalf of the council of Standards New Zealand on 24 October 1995. It was published on 5 December 1995. The following interests are represented on Committee ME/1: A.C.T

    AS/NZS 2080:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee ME-055, Safety Glass for Land Transport. It was approved on behalf of the Council of Standards Australia on 14 August 2006 and on behalf of the Council of Standards New Zealand on 25 August 2006. This Standard was published on 26 September 2006. calculated in accordance with AS/NZS 1170 considering local factors. Some guidance is given within the Technical Literature. 7.3 Nominal 75 mm wide studs must be provided at all vertical RAB sheet and façade panel edges. (This can also be achieved by nailing two nominal 50 mm wide studs together.) 7.4 Timber framing must have a maximum moisture content of 24% at the time of the RAB sheet

    as nzs 2080 1995 pdf

    Mines Safety Bulletin No. 97 Date: 6 February 2012 Introduction . This safety bulletin replaces Mines Safety Bulletin No. 83, dated 23 March 2009. The bulletin has been amended to be consistent with the earthing requirements (clause 4.2.2) of Australian Standard AS/NZS 1020:1995 The control of undesirable static electricity, which specifies a total resistance to earth Search details for as/nzs 4676:2000 Added : 2 year ago owner's manual dri-eaz drizair® dehumidfiers 115-volt models: 1200, 2000, 2400 warning read and save these instructions fire and electric shock …